Based in Leesburg, VA

Geothermal Heat Pump Service in Leesburg, VA

Geothermal heat pump service in Leesburg, VA for homes that heat and cool with the steady temperature of the ground.

Request an estimate

Tell us what you need

Heating and Cooling From the Ground Up

Brick Street Plumbing Heat & Air provides geothermal heat pump service in Leesburg, VA, including diagnostics, repairs, routine maintenance and replacement of the indoor heat pump unit. If your ground-source system is not heating or cooling properly, is tripping a lockout code, or is running far longer than it used to, call us 24/7. A licensed technician will check both the heat pump and the loop it relies on, explain what is wrong, and lay out your options in plain language.

Geothermal systems are less common than standard air-source equipment, so owners in Loudoun County and the rest of Northern Virginia sometimes have trouble finding someone who will work on them. Much of a geothermal unit works like a conventional heat pump, with a compressor, refrigerant circuit, blower and controls, which our technicians service every day. The difference is where the heat comes from, and that adds a water-filled loop, circulating pumps and heat exchangers that also need attention. We serve nearby Maryland and West Virginia towns as well.

HOW IT WORKS

Using the Earth as a Heat Battery

A few feet below the surface, the ground stays at a fairly steady temperature all year, warmer than winter air and cooler than summer air. A geothermal system takes advantage of that. Fluid circulates through pipes buried in the yard or set in wells, picking up heat from the ground in winter and carrying it to the heat pump inside, which concentrates it and sends it through the ductwork. In summer the process runs in reverse, and heat from the house is pushed back into the ground. Because the system trades heat with stable ground rather than hot or freezing outdoor air, it can do the same work using less energy than a conventional system. The heat pump unit also sits indoors, protected from rain, snow and summer sun.

SERVICE CHECKLIST

What We Look At on a Geothermal Service Call

The heat pump and the loop are checked as one system.

Loop Flow and Pressure

Low flow or falling pressure in the ground loop is a common cause of lockouts. We check the circulating pumps and loop pressure.

Heat Exchanger Temperatures

Comparing entering and leaving fluid temperatures shows whether heat is actually moving between the loop and the unit.

Compressor and Refrigerant

The same checks we run on any heat pump: starting components, electrical draw and refrigerant circuit performance.

Blower and Filter

Restricted airflow causes trouble in both heating and cooling. We inspect the blower and filter and confirm airflow.

Controls and Fault Codes

Geothermal units store lockout history. Reading it tells us what tripped the system and how often.

Condensate Drain

In cooling mode the unit makes condensate, and a clogged drain can shut it down or leak into the house.

WHY OWNERS CHOOSE IT

Benefits Worth Protecting

Homeowners pick geothermal for good reasons: it uses less energy than conventional heating and cooling, performs consistently through hot and cold seasons, has a smaller environmental footprint, and keeps the main equipment indoors, away from weather. Those advantages only hold up when the system is maintained. Regular service keeps the loop and heat pump working together, and catching a small flow or refrigerant problem early protects the compressor. When the indoor unit reaches the end of its life, the buried loop can often be reused with a new heat pump. An HVAC inspection lets us assess your existing loop and unit and talk through repair or replacement. See all of our HVAC services for related work.

Geothermal System Acting Up?

Licensed technicians who know heat pumps inside and out.

Call (240) 969-4911 to schedule geothermal service in Leesburg or nearby. Nights and weekends cost the same as weekdays.

Open now · 24/7

(240) 969-4911

Based in Leesburg, VA.

4.6 from 282 Google reviews

Call now Request an estimate

Frequently asked questions

Why does my geothermal heat pump keep going into lockout?

Lockouts are the unit protecting itself, and the most common triggers are low loop flow, low or high refrigerant pressure, or poor airflow across the indoor coil. A failing circulating pump, air trapped in the loop, a dirty filter or a blocked condensate drain can all cause it. Resetting may get the system running for a while, but repeated lockouts mean something needs repair. A technician can read the fault history to narrow it down.

How often does a geothermal system need maintenance?

Once a year is a good baseline, and many owners prefer to schedule it before heating season. A yearly visit covers the heat pump itself, the loop pumps and pressure, the blower, filter and condensate drain, and the controls. Geothermal systems tend to need fewer repairs than air-source units because the main equipment sits indoors, but the loop side still benefits from regular checks. Change the air filter on its normal schedule between visits.

Can a regular HVAC company work on a geothermal heat pump?

Many parts of a geothermal unit, such as the compressor, refrigerant circuit, blower and electrical controls, are the same as on any heat pump, and a qualified HVAC technician can service them. The loop, pumps and water-side heat exchanger add a few extra checks. Our technicians are licensed in HVAC and plumbing, which helps on the water side. Call and tell us about your system before scheduling.

Does a geothermal system work in Loudoun County winters?

Yes. Because a geothermal system draws heat from the ground rather than the outdoor air, its performance holds steady on cold days when an air-source heat pump starts to struggle. Many systems also include a backup electric heat stage for very cold stretches. If you notice the backup running often during ordinary winter weather, the loop or heat pump may need service.

Can I replace my geothermal heat pump without redoing the ground loop?

Often you can. A properly installed ground loop usually outlasts the indoor heat pump, so replacing the unit and reconnecting it to the existing loop is a common approach. Before that, the loop should be checked for flow, pressure and leaks to confirm it is still sound. We will check the condition of both and explain what the replacement would involve.

Tell us about the job

Your name, your number and what needs doing. A person from Brick Street Plumbing Heat & Air gets back to you.

Send the basicsYour name, your number and what needs doing. Three fields, about a minute.
A person gets back to youSomeone from Brick Street calls or texts you within one business day.
We book a time that suits youYou get a time that fits your day, and no obligation until you say go.

Rather talk now?(240) 969-4911Open 24/7, same rate any hour

Request an estimate

Takes about a minute